Metallographic Grinding and polishing Machine with Single Disc

478.00 - 1599.00 USD ($)/Set

Get a Price/Quote

Product Details:

Application Sample Grinding and Polishing for Metallographic Analysis
Humidity 85% RH
Interface Type Panel Control
Features Corrosion Resistant, Low Noise, Integrated Water Supply, Spill Guard
Equipment Type Metallographic Grinding and Polishing Machine
Power Supply 220V, 50Hz
Operating Voltage 220V AC
Click to view more
Share Your Product:

Request To Call Back Send Inquiry

Metallographic Grinding and polishing Machine with Single Disc Price And Quantity

Price Range 478.00 - 1599.00 USD ($)/Set
Minimum Order Quantity 1 Set

Polishing Modes Wet and Dry Grinding
Dimensions (L×W×H) 480 mm × 510 mm × 325 mm
Disc Material Stainless Steel Base with Abrasive Surface
Safety Features Circuit Protection, Emergency Stop
Motor Power 370W
Consumables SiC Grinding Paper, Polishing Cloths
Drainage Integrated Drainage Port
Cleaning System Easy-to-clean Removable Tray
Noise Level <55 dB
Water Supply Direct Water Pipe Connection with Controlled Flow

Metallographic Grinding and polishing Machine with Single Disc Product Specifications

Capacity Single Disc Operation
Accuracy High Precision Polishing
Operating Voltage 220V AC
Power Supply 220V, 50Hz
Test Width 230 mm (Disc Diameter)
Equipment Type Metallographic Grinding and Polishing Machine
Control Mode Digital Touch Control
Humidity 85% RH
Application Sample Grinding and Polishing for Metallographic Analysis
Features Corrosion Resistant, Low Noise, Integrated Water Supply, Spill Guard
Interface Type Panel Control
Frequency 50 Hz
Max Height 325 mm
Resolution Stepless Speed Control
Usage Laboratory, Research, Industrial Inspection
Number of Specimens Single Specimen at a Time
Temperature Operating: 5-40C
Hardness Abrasive Disc Material
Port Size Water Inlet: 8 mm
Test Range Metallographic Sample Preparation
Specimen Size 30 mm (max)
Test Speed 50 - 600 rpm (variable)
Test Stroke Manual and Automatic
Automation Grade Semi-Automatic
Response Time Immediate Start/Stop
Display Type Digital Display
Mounting Type Bench-top
Machine Weight 45 kg

Polishing Modes Wet and Dry Grinding
Dimensions (L×W×H) 480 mm × 510 mm × 325 mm
Disc Material Stainless Steel Base with Abrasive Surface
Safety Features Circuit Protection, Emergency Stop
Motor Power 370W
Consumables SiC Grinding Paper, Polishing Cloths
Drainage Integrated Drainage Port
Cleaning System Easy-to-clean Removable Tray
Noise Level <55 dB
Water Supply Direct Water Pipe Connection with Controlled Flow

Metallographic Grinding and polishing Machine with Single Disc Trade Information

FOB Port Shenzhen
Supply Ability 300 Set Per Month
Delivery Time 7 Days
Main Domestic Market All India

Product Description

Metallographic Grinding and polishing Machine with Single Disc

Main Features:

MP-1B type is a stepless speed adjustable grinding and polishing machine integrating pre-grinding, grinding and polishing. It can adjust the required speed (50-1000/min) according to user needs. The machine is made of glass fiber reinforced plastic, with beautiful appearance and high speed. If the MPT-1 semi-automatic grinding and polishing head produced by our company is selected at the same time (I 22, I 30, I 45mm can be selected arbitrarily), it can achieve a multiplier effect with half the effort and reduce the labor intensity of the operator. It is a relatively perfect and ideal metallographic preparation. equipment.

Main technical specifications:

Throwing disc diameter: 220mm, (250mm customized)

Speed: 50-1000r/min;

Motor: 370W/380V/50Hz (220V customized)

Dimensions: 400*710*370mm

Weight: 35Kg

Reliable and Versatile Grinding Solution

This machine combines robust stainless steel construction with a variable-speed motor and both wet and dry grinding options, delivering flexibility across a range of metallographic sample preparation tasks. Its advanced, digital touch interface ensures user-friendly operation for laboratories, research facilities, and industrial inspection environments.

Enhanced Safety and Easy Maintenance

For added safety, the device incorporates circuit protection and an emergency stop feature. The integrated drainage port and removable tray simplify post-operation cleaning, while its spill guard and corrosion resistance offer additional durability in demanding laboratory conditions.

Precision Control, Immediate Response

Stepless speed control and immediate response time enable meticulous adjustments for differing sample requirements. The digital display provides clear feedback, and the system allows both manual and automatic operation, supporting efficiency and accuracy in every cycle.

FAQ's of Metallographic Grinding and polishing Machine with Single Disc:

Q: How does the water supply system work in this grinding and polishing machine?

A: The machine is equipped with a direct water pipe connection, allowing controlled water flow during the grinding and polishing processes. This system helps reduce heat and remove debris efficiently, supporting both wet and dry grinding modes.

Q: What types of materials can be prepared using this equipment?

A: This machine is specialized for metallographic sample preparation, making it suitable for metals, alloys, and other related materials requiring high-precision surface finishes for analysis or inspection.

Q: When is it necessary to use the wet grinding mode?

A: Wet grinding is recommended when working with heat-sensitive materials or when enhanced debris removal is required. It helps prevent sample overheating, ensures optimal cooling, and improves surface quality during preparation.

Q: Where can the Metallographic Grinding and Polishing Machine be installed?

A: The unit is designed for bench-top mounting, making it ideal for laboratory settings, research institutions, and industrial inspection departments with standard electricity and water supply infrastructure.

Q: What are the benefits of the digital touch control panel?

A: The digital touch control panel provides intuitive operation, enabling stepless speed adjustments, immediate start/stop response, and convenient mode selection. This facilitates precise, repeatable grinding and polishing, enhancing efficiency and accuracy.

Q: How do I maintain and clean the machine after use?

A: Maintenance is simplified by the easy-to-clean removable tray and integrated drainage port. After use, users can remove debris, clean the tray and surfaces, and ensure the water pipe and drainage are free from blockages for optimal long-term performance.

Q: What consumables are required for operation, and how are they replaced?

A: The machine uses silicon carbide (SiC) grinding paper and polishing cloths, which are easily mountable on the disc surface. Consumables should be replaced once wear becomes evident to ensure consistent, high-quality polishing results.

Tell us about your requirement

Price:

Quantity

Select Unit

50
100
200
250
500
1000+

Additional detail

Mobile number

Other Products in 'Other Testing Equipment' category

D Series Electromagnetic Vibration Table Vibrating Test Platform Price Range : 1899.00 - 7899.00 USD ($)/Set Minimum Order Quantity : 1 Usage : Simulate transport or environmental vibration Power Supply : AC 220V 10%, 50 Hz Features : Low noise, stable operation, programmable modes Automation Grade : Semiautomatic Temperature : 5C~40C operating range Frequency : 5200 Hz adjustable Max Height : Table height 550 mm Response Time : <1 second Display Type : LCD digital display Mounting Type : Floor standing Machine Weight : About 250 kg Test Range : Vibration displacement 5 mm Equipment Type : Electromagnetic Vibration Table Capacity : Max load 100 kg Accuracy : 0.1 Hz frequency precision Operating Voltage : Single phase 220V Measuring Range : 1~200 Hz frequency Control Mode : Digital controller with programmable functions Humidity : 85% RH Application : Vibration testing for electronics, automotive and packaging industries Interface Type : RS232/USB Hardness : Highstrength steel table Resolution : 0.01 Hz Number of Specimens : 14 pieces per test Test Speed : 1~200 times/min adjustable Test Stroke : 0~5 mm (adjustable) Specimen Size : Up to 400x400 mm Test Width : 400 mm Gas Pressure : Not required (electromagnetic driven) Port Size : Standard mounting interface

Send Inquiry

Electronic Power Drop Weight Impact Testing Machine HT-14152 Price Range : 2779.00 - 4989.00 USD ($)/Set Minimum Order Quantity : 1 Usage : Laboratory/Quality Control Testing Power Supply : AC 220V, 50/60Hz Features : Programmable drop height, touch screen interface, safety cover, data export Automation Grade : Automatic Temperature : Room Temperature, 15~35C Frequency : 50/60Hz Max Height : 1000 mm Response Time : 1ms Display Type : LCD Digital Display Mounting Type : Floor Standing Machine Weight : Approx 150 kg Test Range : 10~200 J Equipment Type : Drop Weight Impact Testing Machine Capacity : Up to 200 Joules Accuracy : 1% of reading Operating Voltage : 220V AC Measuring Range : 10200 Joules Control Mode : Electronic / Touch Panel Humidity : 20~80% RH Application : Impact strength assessment of plastic, metal, composite sheets, films, etc. Interface Type : RS232/USB Resolution : 0.01 J Number of Specimens : 1 at a time Test Speed : Adjustable (0.1~1.2 m/s) Test Stroke : 0~1000 mm (Adjustable) Specimen Size : Up to 300 mm x 300 mm Test Width : Up to 300 mm Gas Pressure : 0.50.7 MPa Port Size : Standard Size, customizable

Send Inquiry

Single Disc Automatic Metallographic Pre-grinding Machine Price Range : 385.00 - 959.00 USD ($)/Set Minimum Order Quantity : 1 Usage : Material sample pregrinding Power Supply : AC 220V, 50Hz Features : Automatic specimen loading, programmable control, water cooling Automation Grade : Automatic Temperature : 5C to 40C Frequency : 50Hz Max Height : Approx. 450 mm Response Time : Immediate (on operation) Display Type : Digital speed and time display Mounting Type : Benchtop Machine Weight : Approx. 70 kg Test Range : Applicable for various metallographic sample types Equipment Type : Metallographic Pregrinding Machine Capacity : One disc, multiple samples possible with adapters Accuracy : Controlled polishing and grinding, precision operation Operating Voltage : 220V AC Measuring Range : N/A for pregrinding Control Mode : Automatic microprocessor control Humidity : 85% RH Application : Metallography laboratory sample preparation Interface Type : Touch panel interface Hardness : Suitable for various material hardness levels Number of Specimens : Single specimen operation Test Speed : 50600 rpm (variable) Test Stroke : Adjustable, up to 30 mm Specimen Size : 30 mm (standard), custom sizes optional Test Width : Standard disc: 203 mm (8 inch) Gas Pressure : 0.20.5 MPa (compressed air for automatic loading)

Send Inquiry

Improved WHZ Desktop Thermostat Drying Oven Thermostat Incubator Price Range : 699.00 - 1988.00 USD ($)/Set Minimum Order Quantity : 1 Usage : Incubation, Drying, Sterilization Power Supply : AC 220V, 50Hz Features : Improved design, Even heat distribution, Overtemperature protection Automation Grade : SemiAutomatic Temperature : Room Temperature to 200C Frequency : 50 Hz Max Height : 410 mm exterior Response Time : Fast Display Type : Digital Display Mounting Type : Desktop Machine Weight : 32 kg Test Range : Ambient to 200C Equipment Type : Desktop Thermostat Drying Oven Incubator Capacity : 30 L Accuracy : 1C Operating Voltage : 220V AC Measuring Range : 0~200C Control Mode : Digital Thermostat Humidity : 85% RH Application : Laboratory Drying, Sterilizing, Baking Interface Type : Manual Resolution : 0.1C

Send Inquiry

SEND INQUIRY CALL ME FREE