Product Description
Melt Flow Indexer , Flow Rate Meter
Product introduction
Melt Flow Rate Instrument MIP meets the demands of GB/T3682-2000, as well as ISO1133-97, ASTM D1238ïüÃ
âJIS K7210 and other standards involving main parameters. The melt flow indexer is suitable for measuring melt mass flow rate(MFR) and melt volume flow rate(MVR) of plastic materials such as polyethylene, polypropylene, polystyrene, ABS, polyamide, fiber resin, acrylic, POM, fluorine plastic, polycarbonate. It is widely used in plastic production, plastic products, petrochemical industries and related institutions, research institutes and inspection departments.
Software features
A. High-precision color controller in English; special customized membrane keypad; incomparable advantages in the control precision and service life.
B. Automatic cutting, accurately up to 0.1s; setting the cutting time and the number of cutting freely.
C. Built-in mini printer to print the test data
D. Dual temperature control systemïüÃ
¡double imported heating coil, double imported PT100 platinum resistance sensor, independent temperature control of the upper and lower sections, to improve the test accuracy and stability of temperature.
E. Increasing displacement sensor, able to testing MVR , the precision up to 0.001mm.
F. Able to connect to a computer via USB, and to set test conditions by software on the computer, to print data and and store data.
Display mode
Performance standards
Temperature rangeïüÃ
¡normal temperature-400âââ¬Å¾Ãâ
Temperature fluctuationïüÃ
¡Ãâñ0.2âââ¬Å¾Ãâ
Temperature uniformityïüÃ
¡Ãâñ0.5âââ¬Å¾Ãâ
Temperature display resolutionïüÃ
¡0.1âââ¬Å¾Ãâ
Time display resolutionïüÃ
¡0.1S
cylinder diameterïüÃ
¡ÃŽÃ¦2.095Ãâñ0.005mm
The length of the discharge holeïüÃ
¡8.000Ãâñ0.025mm
Charging cylinder diameterïüÃ
¡ÃŽÃ¦9.550Ãâñ0.025mm
Weight accuracyïüÃ
¡Ãâñ0.5%
Output modeïüÃ
¡ automatically printing via mini printer
Cutting modeïüÃ
¡cutting by hand or automatically
Test loadïüÃ
¡total 8 gradesïüÃ
â8 sets of weight
Power voltageïüÃ
¡AC220VÃâñ10% 50HZ