AU-600VM Quality Volume Change Rate Density Tester

Product Description

AU-600VM Quality Volume Change Rate Density Tester

Application:

seal rubber,inflated rubber,porosity foamed plastic,porosity metal materials,porosity ceramic,metal seal...new materials researching laboratory.

This instrument had been researched and produced by Quarrz,which adopt high precision weighting sensor.Placing product into water or oil to saturation,calculate the ratio for pre-saturation and after-saturation,it is the general definition for quality change rate or volume change rate.This instrument has the function to meaure ration of volume and total volume before,after saturation.ration of opening pore volume and total volume,closing pore volume and total volume,ratio of quality and total quality,volume and quality.Density value can be tested instantly.

Measuring Resolution:

AU-600VM density resolution:0.001g/cm3

Feature and Function:

1.Easy operation,accuracy and reliability.

2.Any shape can be measured instantly,suitable for quick measurement situation.such as site and laboratory.

3.Either water or other liquid can be used as medium.

4.Adopt completed testing board and unobstructed without lifting lid design,more simpler operation,also makes the measuring result more reliable.

5.Adopt completed injection moulding transparent PC water tank(length 15.3cm x width 10.7cm x 9.3cm),which can resist wear,fall off,and corrosion.

6.Function of actual water temperature setting,measuring medium density setting,air buoyancy compensation setting,density top and bottom limitation setting.

7.Equiped special windproof dustproof cover,which makes the structure more convenient and durable.

8.Including RS - 232C communication interface.it is convenient to connect PC with printer.DE-40 can be chose to print measuring data.

9.Gross weight/Size:4.5kg/length 42.5cm x width 17.5cm x height 32.5cm

Power supply:AC 100V-240V 50HZ/60HZ  Europe standard

Measuring Procedure:

(1)place sample on testing board to measure weight in air,press ENTER key to memory.

(2)place sample into water,density value will be displayed instantly(No need to press ENTER key again)