AU-120ET Ethanol Concentration and Density Tester

Product Description

AU-120ET Ethanol Concentration and Density Tester

Specification:

Features: 

1.Built-in comparison table for alcohol water solution density and ethanol content.can read density,ethanol content automatically.also can convert into ethanol content in 20 degree.
2.Compared with traditional pycnometer,refraction,alcohol meter.this product is no need to demarcate pycnometer by hands.no need to calculate density manually.no need to check ethanol content based on comparison table
3.High accurancy up to 0.1 percent without human factor influence
4.Has the function of air buoyancy compensation
5.Read ethanol content (V/V),density SG directly
6.Short measuring time 5 to 30S
7.Convenient for cleaning:open cleaning
8.Temperature compensation:ethanol content (V/V),density SG in standard temperature 20 degree.
9.No need to input conversion coefficient for density and concentration
10.Automatically calculate the temperature compensation coefficient in  any temperature range from 0 to 99.9 degree.
11.Not only calculate temperature compensation coefficient automatically.also can input by hands.compensation range is (0.00001-9.99999) / degree.
12.The displaying sequence of ethanol content (V/V),density SG
can be setup freely
13.Has the function of air buoyancy compensation and weights volume thermal expansion coefficient compensation
14.Just need 50ml or less samples
15.Equiped with AU-20A standard liquid measuring accessories
16.Including RS-232C interface.AU-40A cable is optional to connect with PC.AU-40 printer is optional to print measuring data.
17.Equiped with special wind shield.