DE-200M High Precision Multi-function Solids Density Meter

Product Description

DE-200M High Precision Multi-function Solids Density Meter 

Application: 

Powder Metallurgy, Magnetic Materials, Hard Alloy, Rubber, Plastic, Wire and Cable, Laboratory, Institute of New Materials Researching and Testing. Field of 

quality management, cost control, formula researching and developing, density test of small products and high-precision products, researchate of mrial density.

Standards: 

In accordance with ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 2781,ISO 1183,GB/T208,JB/T7780 standards etc.

Density resolution of DE120M is 0.0001 g/cm3. No need to open and close the lip with the completed aluminum alloy board. It is more high precision,convenient,spee-

diness,humanization. Provide many measuring methods for porosity materials,such as saturation method and surface covering method. Density,open pore volume,total 

porosity and porosity can be tested. It can be used to automatically judge whether the sample is qualified or not,prompt alarm. It has the function of top and bottom limitation,measuring the volume abrasion value DIN of rubber,expansibility,bulk density and apparent density of powder,measuring oil content of oil bearing,and measuring ceramic density and porosity.

Specification:

Model: DE-200M

Density Resolution: 0.0001 g/cm3                                             

Maximum Weight: 200g       

Weight Resolution: 0.001g

Features:

(1)No need to open and close the lid; Simple operation;Shorter time; According to the specification of new materials laboratory.

(2)Show the percentage composition of mixed samples for researching and developing new materials.Suitable for powder metallurgy,magnetic materials,ceramics,fireproofing materials,precious metal and so on.

(3)Automatically judge whether the sample is qualified or not;prompt alarm.

(4)Function of solution compensation.either water or liquid can be used as medium.

(5)Function of setting actual water temperature,measuring medium density,and water proof medium density.

(6)Function of setting aerostatic buoyancy compensation and the bound of density.

(7)Adopt the completed high-capacity measuring accessories with the transparent injection mould sink,which can resist wear,fall off,and corrosion. 

(8)Adopt the completed special windproof and dustproof cover,which makes the instrument convenient and durable.

(9)Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with the instrument.

Standard Accessories:

Host, Sink, Testing board, Tweezer, Thermometer, 100G weight, Windproof and dustproof cover, A set of measuring granule accessories, A set of measuring floating body accessories, Power transformer

Measurement Procedure of Non-hydroscopicity Products:

(1)Place sample on testing board to measure weight in air,press ENTER key.

(2)Place sample into water to measure weight in water,press ENTER key.Density value will be displayed.

Measurement Procedure of Hydroscopicity Products:

(1)Place sample on testing board to measure weight in air,press ENTER key. 

(2)Place sample that did waterproof treatment on testing board to measure weight in air.press ENTER key.

(3) Place sample that did waterproof treatment into water to measure weight in water,press ENTER key.Density value will be displayed.