Gravity Meter for Solids and Liquids

Product Description

China Factory Price Specific Gravity Tester Gravity Meter, Density Testing Device for Solids and Liquids DA-300T

Accurate measurement,Simple operation,Stable and Durable

 It is suitable for the field of quality management,cost control,new formula

researching,new materials researching, scientific academies, researching key laboratories,quality inspection.etc.

Standards:

According to the ASTM D792,ASTM D297,GB/T1033,GB/T2951,JIS K6268,ISO 278,ISO 1183,GB/T11540,GB/T12206,GB/T5518 standards etc. In accordance with Archimedes principle.

Adopt the host imported from Taiwan; Resolution 0.001 g/cm3; Features of simple operation,wide application,fully function; alarm rings when judge density is unqualified; No need to open and close the lid with the unicase aluminum alloy measuring table; The operation is more simple,rapid, hommization;adopt the memoryless dynamic measurement method for liquid mode; Function of measuring density with three mode,get out of the cumbersome operation of re-calibrate when change weight; Function of displaying concentration,density and baume.

Specifications:

Density resolution: 0.001 g/cm3

Maximum weight: 300g

Minimum weight: 0.005g/0.01g

Measurement range: 0.001-99.999g/cm3

Features:

1. No need to open and close the lid; Simple operation;Shorter measuring time; According to the specification of new materials laboratory.
2. Show the percentage composition of mixed samples for researching and developing new materials.
3. Automatically judge whether density is qualified or not and prompt alarm.
4. Function of automatic zero tracking,buzzer warning,and overload warning.
5. Function of solution compensation.either water or liquid can be used as medium.
6. Function of setting actual water temperature,measuring medium density,and water proof medium density.
7. Function of setting aerostatic buoyancy and the bound of density.
8. About the solid mode,adopt the completed high-capacity measurement accessories with the
9. Transparent injection mould tank,which can resist wear,fall off,and corrosion.
10. About the liquid mode, density value can be displayed by one procedure.repeatedly continuous speediness measurement can be worked.
11. Density value of samples with the temperature from normal to 100 centigrade can be measured.
12. Take samples conveniently.50CC would be okay.
13. It is very easy to clean the measurement cup,can not got the limitation of the size of pycnometer caliber.
14. Adopt the completed stainless steel measuring hook.
15. Coordinate with the operation of thermostatic tank to measure the proportion with the required temperature.
16. Function of displaying concentration of density and baume.
17. Adopt the completed special windproof and dustproof cover,which makes the structure convenient and durable.
18. Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.
19. Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with instrument.