Liquid Density Meter DH-300L
Direct reading data, Shorter measuring time, Density resolution 0.001 g/cm3
Application : Chemical solution,modern energy,oil fuel,fine chemical engineering,chemical reagent,chemistry researching laboratory.
Standards : In accordance with Archimedes principle, GB/T 611,.GB/T11540,GB/T12206,GB/T5518 standards etc.
Combine Archimedes principle with modern electronics technique of DH-300L; Digital display liquid desi meter; The data can be read directly with high measurement accuracy; The operation is more easy and get away from the influence of external factor and temperature compared with traditional we chsler balance method and pycno meter method; It can be applied to the field of quality management, cost control,formula researching and so on. Also,the solvent,adhesive,paint, pitch,resin,chemical oils,edible oil,food additives,drink,dairy products can be measured.
- Density resolution: 0.001 g/cm3
- Maximum weight:300g
- Minimum weight:0.005g
- Measuring range: 0.001-99.999g/cm3
- Density value can be showed by one procedure;repeatedly continuous rapid measurement can be worked.
- Digital display; High accuracy of measurement; Simple operation; Stable and Durable.
- Density value of samples with the temperature from normal to 100 centigrade can be measured.
- Take samples conveniently;50CC or less would be okay.
- There is no cumbersome debugging and operation compared with traditional we chsler balance method and pycno meter method.
- It is very easy to clean measurement cup;can't get the limitation of the size of pycno meter caliber.
- Coordinate with the operation of thermostatic tank to measure the proportion with the required temperature.
- Adopt the completed special windproof and dust proof cover,which makes the structure convenient and durable.
- Volatile liquid,corrosivity liquid,vicidity liquid,strong acid and strong lye liquid can be measured quickly.
- Interface of RS-232C is included.the printer of DE-40 will be available to connect PC with the instrument.
- Place beaker with sample on testing board.and take off weight of pothook.
- Hang standard weight on the pothook and submerged in liquid to be tested totally;press ENTER button to memory.Density valuve will be displayed.